Nordmark is proud to offer the following Destroyer design for either purchase from Nordish yards or liscenced construction.
DDExport-35, Nordmark Export Destroyer laid down 1935
Displacement:
1,619 t light; 1,709 t standard; 1,925 t normal; 2,098 t full load
Dimensions: Length overall / water x beam x draught
363.53 ft / 360.00 ft x 36.00 ft x 13.00 ft (normal load)
110.80 m / 109.73 m x 10.97 m x 3.96 m
Armament:
6 - 4.33" / 110 mm guns (3x2 guns), 40.61lbs / 18.42kg shells, 1935 Model
Dual purpose guns in deck mounts with hoists
on centreline ends, majority forward, 1 raised mount - superfiring
8 - 1.46" / 37.0 mm guns (2x4 guns), 1.55lbs / 0.70kg shells, 1935 Model
Anti-aircraft guns in deck mounts
on side, all amidships
8 - 0.79" / 20.0 mm guns (2x4 guns), 0.24lbs / 0.11kg shells, 1935 Model
Machine guns in deck mounts
on side, evenly spread
Weight of broadside 258 lbs / 117 kg
Shells per gun, main battery: 350
8 - 21.0" / 533.4 mm above water torpedoes
Armour:
- Gun armour: Face (max) Other gunhouse (avg) Barbette/hoist (max)
Main: 1.50" / 38 mm 0.50" / 13 mm -
2nd: 0.50" / 13 mm - -
Machinery:
Oil fired boilers, steam turbines,
Geared drive, 2 shafts, 38,855 shp / 28,986 Kw = 34.00 kts
Range 5,000nm at 15.00 kts
Bunker at max displacement = 389 tons
Complement:
144 - 188
Cost:
£1.094 million / $4.375 million
Distribution of weights at normal displacement:
Armament: 32 tons, 1.7 %
Armour: 15 tons, 0.8 %
- Belts: 0 tons, 0.0 %
- Torpedo bulkhead: 0 tons, 0.0 %
- Armament: 15 tons, 0.8 %
- Armour Deck: 0 tons, 0.0 %
- Conning Tower: 0 tons, 0.0 %
Machinery: 937 tons, 48.6 %
Hull, fittings & equipment: 600 tons, 31.2 %
Fuel, ammunition & stores: 307 tons, 15.9 %
Miscellaneous weights: 35 tons, 1.8 %
Overall survivability and seakeeping ability:
Survivability (Non-critical penetrating hits needed to sink ship):
572 lbs / 259 Kg = 14.1 x 4.3 " / 110 mm shells or 0.3 torpedoes
Stability (Unstable if below 1.00): 1.22
Metacentric height 1.6 ft / 0.5 m
Roll period: 12.1 seconds
Steadiness - As gun platform (Average = 50 %): 70 %
- Recoil effect (Restricted arc if above 1.00): 0.40
Seaboat quality (Average = 1.00): 1.07
Hull form characteristics:
Hull has rise forward of midbreak
and transom stern
Block coefficient: 0.400
Length to Beam Ratio: 10.00 : 1
'Natural speed' for length: 21.95 kts
Power going to wave formation at top speed: 67 %
Trim (Max stability = 0, Max steadiness = 100): 65
Bow angle (Positive = bow angles forward): 10.00 degrees
Stern overhang: 0.00 ft / 0.00 m
Freeboard (% = measuring location as a percentage of overall length):
- Stem: 20.00 ft / 6.10 m
- Forecastle (40 %): 18.00 ft / 5.49 m
- Mid (50 %): 18.00 ft / 5.49 m (13.50 ft / 4.11 m aft of break)
- Quarterdeck (10 %): 13.50 ft / 4.11 m
- Stern: 13.50 ft / 4.11 m
- Average freeboard: 16.07 ft / 4.90 m
Ship tends to be wet forward
Ship space, strength and comments:
Space - Hull below water (magazines/engines, low = better): 173.6 %
- Above water (accommodation/working, high = better): 90.6 %
Waterplane Area: 8,279 Square feet or 769 Square metres
Displacement factor (Displacement / loading): 77 %
Structure weight / hull surface area: 36 lbs/sq ft or 178 Kg/sq metre
Hull strength (Relative):
- Cross-sectional: 0.50
- Longitudinal: 2.22
- Overall: 0.58
Hull space for machinery, storage, compartmentation is cramped
Room for accommodation and workspaces is adequate
Ship has slow, easy roll, a good, steady gun platform
A 5-130mm design on the same hull is also available, designs to other specifications can be produced on request.