As a possible PoD from the original program (in addition to all the waves likely from other WW events that tend to sooth some of the historical wrinkles in the program), I would like to propose the involvement of Ducati from a early stage in up-scaling the program. Ducati being a major player in the Italian vacuum tube and radio manufacturing at this time (Motorcycle production begins to enter the company in the mid 1940's) in addition to FIVRE would have been able to provide additional resources that would have allowed for scaling up of both the research side of the program and production. Greater cooperation with Phillips via AEGIS ties are an additional possibility.Quoted
Guglielmo Marconi initiated the research in Italy on radio-based detection technology. In 1933, while participating with his Italian firm in experiments with a 600 MHz communications link across Rome, he noted transmission disturbances caused by moving objects adjacent to its path. This led to the development at his laboratory at Cornegliano of a 330-MHz (0.91-m) CW Doppler detection system that he called radioecometro. Barkhausen-Kurz tubes were used in both the transmitter and receiver.
In May 1935, Marconi demonstrated his system to the Fascist dictator Benito Mussolini and members of the military General Staff; however the output power was insufficient for military use. While Marconi’s demonstration raised considerable interest, little more was done with his apparatus.
Mussolini directed that radio-based detection technology be further developed, and it was assigned to the Regio Instituto Electrotecnico e delle Comunicazioni (RIEC, Royal Institute for Electro-technics and Communications). The RIEC had been established in 1916 on the campus of the Italian Naval Academy in Livorno. Lieutenant Ugo Tiberio, a physics and radio-technology instructor at the Academy, was assigned to head the project on a part-time basis.[59]
Tiberio prepared a report on developing an experimental apparatus that he called telemetro radiofonico del rivelatore (RDT, Radio-Detector Telemetry). The report, submitted in mid-1936, included what was later known as the radar range equation. When the work got underway, Nello Carrara, a civilian physics instructor who had been doing research at the RIEC in microwaves,[60] was added to be responsible for developing the RDT transmitter.
Before the end of 1936, Tiberio and Carrara had demonstrated the EC-1, the first Italian RDT system. This had an FM transmitter operating at 200 MHz (1.5 m) with a single parabolic cylinder antenna. It detected by mixing the transmitted and the Doppler-shifted reflected signals, resulting in an audible tone.
The EC-1 did not provide a range measurement; to add this capability, development of a pulsed system was initiated in 1937. Captain Alfeo Brandimarte joined the group and primarily designed the first pulsed system, the EC-2. This operated at 175 MHz (1.7 m) and used a single antenna made with a number of equi-phased dipoles. The detected signal was intended to be displayed on an oscilloscope. There were many problems, and the system never reached the testing stage.
Work then turned to developing higher power and operating frequencies. Carrara, in cooperation with the firm FIVRE, developed a magnetron-like device. This was composed of a pair of triodes connected to a resonate cavity and produced 10 kW at 425 MHz (70 cm). It was used in designing two versions of the EC-3, one for shipboard and the other for coastal defense.[61]
Italy, joining Germany, entered WWII in June 1940 without an operational RDT. A breadboard of the EC-3 was built and tested from atop a building at the Academy, but most RDT work was stopped as direct support of the war took priority.
Forum Software: Burning Board® Lite 2.1.2 pl 1, developed by WoltLab® GmbH